info@richmondgear.com
864-843-9275
|         EZ LINK
Calculators
Newsletter Sign-up

Differential Ring and Pinon Front and Rear Complete Kit (10, 10)

64736

XLK-5011 Application Notes

Warranty

1 Year or 50,000 Miles

XLK-5011 Specifications

App Model Dana 30 TJ, Dana 35
Cover Bolt Quantity 10, 10
Differential Case Design Type Dana 30 TJ, Dana 35, Dana 35, Dana 30 TJ
Gear Ratio 4.88, 4.88
Pinion Gear Tooth Quantity 8, 8
Pinion Shaft Diameter 1.376 (Inch), 1.376 (Inch)
Pinion Spline Count 26, 26
Position Front and Rear
Prop 65 Long Label WARNING: Reproductive Harm - www.p65warnings.ca.gov
Prop 65 Short Label WARNING: Cancer - www.p65warnings.ca.gov
Prop 65 Y N N
Ratio 4.88
Ring Gear Bolt Quantity 10 Front, 8 Rear, 10 Front, 8 Rear
Ring Gear Material 8620 Steel, 8620 Steel
Ring Gear Outside Diameter 7.125 Front (Inch), 7.5 Rear (Inch), 7.125 Front (Inch), 7.5 Rear (Inch)
Ring Gear Rotation Standard, Standard
Ring Gear Tooth Quantity 39, 39
Taxonomy A LD Differential, LD Differential, LD Differential, LD Differential
Taxonomy B Ring and Pinion Gear Packages, Ring and Pinion Gear Packages, Ring and Pinion Gear Packages
Taxonomy C Front and Rear, Front and Rear, Front and Rear
Taxonomy D 4.88, 4.88, 4.88
Where to buy

Vehicle Applications

  • 1997 Chevrolet Avondale

    Application notes:

    • For Dana 30 Front and Dana 35 Rear Non-Rubicon - Ring and Pinions Including Timken Bearing Kits
    • 4.88 Ratio
    • Fits 3.73 and Higher Carrier Front
    • Fits 3.54 and Higher Carrier Rear
    • If Currently Using A 3.54 Ratio You Will Need To Purchase A New Front Carrier
    • If Currently Using A 3.07 Ratio You Will Need to Purchase a New Front And Rear Carrier
  • 1997 Jeep TJ

    Application notes:

    • For Dana 30 Front and Dana 35 Rear Non-Rubicon - Ring and Pinions Including Timken Bearing Kits
    • 4.88 Ratio
    • Fits 3.73 and Higher Carrier Front
    • Fits 3.54 and Higher Carrier Rear
    • If Currently Using A 3.54 Ratio You Will Need To Purchase A New Front Carrier
    • If Currently Using A 3.07 Ratio You Will Need to Purchase a New Front And Rear Carrier
  • 1998 Jeep TJ

    Application notes:

    • For Dana 30 Front and Dana 35 Rear Non-Rubicon - Ring and Pinions Including Timken Bearing Kits
    • 4.88 Ratio
    • Requires 3.73 and Higher Front Carrier
    • Requires 3.54 and Higher Rear Carrier
    • If Currently Using A 3.54 Ratio You Will Need To Purchase A New Front Carrier
    • If Currently Using A 3.07 Ratio You Will Need to Purchase a New Front And Rear Carrier
  • 1998 – 1999 Jeep TJ

    Application notes:

    • For Dana 30 Front and Dana 35 Rear Non-Rubicon - Ring and Pinions Including Timken Bearing Kits
    • 4.88 Ratio
    • Fits 3.73 and Higher Carrier Front
    • Fits 3.54 and Higher Carrier Rear
    • If Currently Using A 3.54 Ratio You Will Need To Purchase A New Front Carrier
    • If Currently Using A 3.07 Ratio You Will Need to Purchase a New Front And Rear Carrier
  • 1999 Jeep TJ

    Application notes:

    • For Dana 30 Front and Dana 35 Rear Non-Rubicon - Ring and Pinions Including Timken Bearing Kits
    • 4.88 Ratio
    • Requires 3.73 and Higher Front Carrier
    • Requires 3.54 and Higher Rear Carrier
    • If Currently Using A 3.54 Ratio You Will Need To Purchase A New Front Carrier
    • If Currently Using A 3.07 Ratio You Will Need to Purchase a New Front And Rear Carrier
  • 2000 Jeep TJ

    Application notes:

    • For Dana 30 Front and Dana 35 Rear Non-Rubicon - Ring and Pinions Including Timken Bearing Kits
    • 4.88 Ratio
    • Requires 3.73 and Higher Front Carrier
    • Requires 3.54 and Higher Rear Carrier
    • If Currently Using A 3.54 Ratio You Will Need To Purchase A New Front Carrier
    • If Currently Using A 3.07 Ratio You Will Need to Purchase a New Front And Rear Carrier
  • 2001 Jeep TJ

    Application notes:

    • For Dana 30 Front and Dana 35 Rear Non-Rubicon - Ring and Pinions Including Timken Bearing Kits
    • 4.88 Ratio
    • Requires 3.73 and Higher Front Carrier
    • Requires 3.54 and Higher Rear Carrier
    • If Currently Using A 3.54 Ratio You Will Need To Purchase A New Front Carrier
    • If Currently Using A 3.07 Ratio You Will Need to Purchase a New Front And Rear Carrier
  • 2002 Jeep TJ

    Application notes:

    • For Dana 30 Front and Dana 35 Rear Non-Rubicon - Ring and Pinions Including Timken Bearing Kits
    • 4.88 Ratio
    • Requires 3.73 and Higher Front Carrier
    • Requires 3.54 and Higher Rear Carrier
    • If Currently Using A 3.54 Ratio You Will Need To Purchase A New Front Carrier
    • If Currently Using A 3.07 Ratio You Will Need to Purchase a New Front And Rear Carrier
  • 2003 Jeep TJ

    Application notes:

    • For Dana 30 Front and Dana 35 Rear Non-Rubicon - Ring and Pinions Including Timken Bearing Kits
    • 4.88 Ratio
    • Fits 3.73 and Higher Carrier Front
    • Fits 3.54 and Higher Carrier Rear
    • If Currently Using A 3.54 Ratio You Will Need To Purchase A New Front Carrier
    • If Currently Using A 3.07 Ratio You Will Need to Purchase a New Front And Rear Carrier
  • 2004 Jeep TJ

    Application notes:

    • For Dana 30 Front and Dana 35 Rear Non-Rubicon - Ring and Pinions Including Timken Bearing Kits
    • 4.88 Ratio
    • Fits 3.73 and Higher Carrier Front
    • Fits 3.54 and Higher Carrier Rear
    • If Currently Using A 3.54 Ratio You Will Need To Purchase A New Front Carrier
    • If Currently Using A 3.07 Ratio You Will Need to Purchase a New Front And Rear Carrier
  • 2005 Jeep TJ

    Application notes:

    • For Dana 30 Front and Dana 35 Rear Non-Rubicon - Ring and Pinions Including Timken Bearing Kits
    • 4.88 Ratio
    • Fits 3.73 and Higher Carrier Front
    • Fits 3.54 and Higher Carrier Rear
    • If Currently Using A 3.54 Ratio You Will Need To Purchase A New Front Carrier
    • If Currently Using A 3.07 Ratio You Will Need to Purchase a New Front And Rear Carrier
  • 2006 Jeep TJ

    Application notes:

    • For Dana 30 Front and Dana 35 Rear Non-Rubicon - Ring and Pinions Including Timken Bearing Kits
    • 4.88 Ratio
    • Fits 3.73 and Higher Carrier Front
    • Fits 3.54 and Higher Carrier Rear
    • If Currently Using A 3.54 Ratio You Will Need To Purchase A New Front Carrier
    • If Currently Using A 3.07 Ratio You Will Need to Purchase a New Front And Rear Carrier
  • 1997 Jeep Wrangler

    Application notes:

    • For Dana 30 Front and Dana 35 Rear Non-Rubicon - Ring and Pinions Including Timken Bearing Kits
    • 4.88 Ratio
    • Fits 3.73 and Higher Carrier Front
    • Fits 3.54 and Higher Carrier Rear
    • If Currently Using A 3.54 Ratio You Will Need To Purchase A New Front Carrier
    • If Currently Using A 3.07 Ratio You Will Need to Purchase a New Front And Rear Carrier
  • 1997 – 1998 Jeep Wrangler

    Application notes:

    • For Dana 30 Front and Dana 35 Rear Non-Rubicon - Ring and Pinions Including Timken Bearing Kits
    • 4.88 Ratio
    • Requires 3.73 and Higher Front Carrier
    • Requires 3.54 and Higher Rear Carrier
    • If Currently Using A 3.54 Ratio You Will Need To Purchase A New Front Carrier
    • If Currently Using A 3.07 Ratio You Will Need to Purchase a New Front And Rear Carrier
  • 1998 Jeep Wrangler

    Application notes:

    • For Dana 30 Front and Dana 35 Rear Non-Rubicon - Ring and Pinions Including Timken Bearing Kits
    • 4.88 Ratio
    • Fits 3.73 and Higher Carrier Front
    • Fits 3.54 and Higher Carrier Rear
    • If Currently Using A 3.54 Ratio You Will Need To Purchase A New Front Carrier
    • If Currently Using A 3.07 Ratio You Will Need to Purchase a New Front And Rear Carrier
  • 1999 Jeep Wrangler

    Application notes:

    • For Dana 30 Front and Dana 35 Rear Non-Rubicon - Ring and Pinions Including Timken Bearing Kits
    • 4.88 Ratio
    • Fits 3.73 and Higher Carrier Front
    • Fits 3.54 and Higher Carrier Rear
    • If Currently Using A 3.54 Ratio You Will Need To Purchase A New Front Carrier
    • If Currently Using A 3.07 Ratio You Will Need to Purchase a New Front And Rear Carrier
  • 2000 Jeep Wrangler

    Application notes:

    • For Dana 30 Front and Dana 35 Rear Non-Rubicon - Ring and Pinions Including Timken Bearing Kits
    • 4.88 Ratio
    • Requires 3.73 and Higher Front Carrier
    • Requires 3.54 and Higher Rear Carrier
    • If Currently Using A 3.54 Ratio You Will Need To Purchase A New Front Carrier
    • If Currently Using A 3.07 Ratio You Will Need to Purchase a New Front And Rear Carrier
  • 2000 – 2001 Jeep Wrangler

    Application notes:

    • For Dana 30 Front and Dana 35 Rear Non-Rubicon - Ring and Pinions Including Timken Bearing Kits
    • 4.88 Ratio
    • Fits 3.73 and Higher Carrier Front
    • Fits 3.54 and Higher Carrier Rear
    • If Currently Using A 3.54 Ratio You Will Need To Purchase A New Front Carrier
    • If Currently Using A 3.07 Ratio You Will Need to Purchase a New Front And Rear Carrier
  • 2001 Jeep Wrangler

    Application notes:

    • For Dana 30 Front and Dana 35 Rear Non-Rubicon - Ring and Pinions Including Timken Bearing Kits
    • 4.88 Ratio
    • Requires 3.73 and Higher Front Carrier
    • Requires 3.54 and Higher Rear Carrier
    • If Currently Using A 3.54 Ratio You Will Need To Purchase A New Front Carrier
    • If Currently Using A 3.07 Ratio You Will Need to Purchase a New Front And Rear Carrier
  • 2002 Jeep Wrangler

    Application notes:

    • For Dana 30 Front and Dana 35 Rear Non-Rubicon - Ring and Pinions Including Timken Bearing Kits
    • 4.88 Ratio
    • Requires 3.73 and Higher Front Carrier
    • Requires 3.54 and Higher Rear Carrier
    • If Currently Using A 3.54 Ratio You Will Need To Purchase A New Front Carrier
    • If Currently Using A 3.07 Ratio You Will Need to Purchase a New Front And Rear Carrier
  • 2003 Jeep Wrangler

    Application notes:

    • For Dana 30 Front and Dana 35 Rear Non-Rubicon - Ring and Pinions Including Timken Bearing Kits
    • 4.88 Ratio
    • Fits 3.73 and Higher Carrier Front
    • Fits 3.54 and Higher Carrier Rear
    • If Currently Using A 3.54 Ratio You Will Need To Purchase A New Front Carrier
    • If Currently Using A 3.07 Ratio You Will Need to Purchase a New Front And Rear Carrier
  • 2003 – 2004 Jeep Wrangler

    Application notes:

    • For Dana 30 Front and Dana 35 Rear Non-Rubicon - Ring and Pinions Including Timken Bearing Kits
    • 4.88 Ratio
    • Requires 3.73 and Higher Front Carrier
    • Requires 3.54 and Higher Rear Carrier
    • If Currently Using A 3.54 Ratio You Will Need To Purchase A New Front Carrier
    • If Currently Using A 3.07 Ratio You Will Need to Purchase a New Front And Rear Carrier
  • 2004 Jeep Wrangler

    Application notes:

    • For Dana 30 Front and Dana 35 Rear Non-Rubicon - Ring and Pinions Including Timken Bearing Kits
    • 4.88 Ratio
    • Requires 3.73 and Higher Front Carrier
    • Requires 3.54 and Higher Rear Carrier
    • If Currently Using A 3.54 Ratio You Will Need To Purchase A New Front Carrier
    • If Currently Using A 3.07 Ratio You Will Need to Purchase a New Front And Rear Carrier
  • 2005 Jeep Wrangler

    Application notes:

    • For Dana 30 Front and Dana 35 Rear Non-Rubicon - Ring and Pinions Including Timken Bearing Kits
    • 4.88 Ratio
    • Requires 3.73 and Higher Front Carrier
    • Requires 3.54 and Higher Rear Carrier
    • If Currently Using A 3.54 Ratio You Will Need To Purchase A New Front Carrier
    • If Currently Using A 3.07 Ratio You Will Need to Purchase a New Front And Rear Carrier
  • 2006 Jeep Wrangler

    Application notes:

    • For Dana 30 Front and Dana 35 Rear Non-Rubicon - Ring and Pinions Including Timken Bearing Kits
    • 4.88 Ratio
    • Requires 3.73 and Higher Front Carrier
    • Requires 3.54 and Higher Rear Carrier
    • If Currently Using A 3.54 Ratio You Will Need To Purchase A New Front Carrier
    • If Currently Using A 3.07 Ratio You Will Need to Purchase a New Front And Rear Carrier

Installation

Installation Instructions
⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov