Differential Ring and Pinion (10, 10)

1 Year or 50,000 Miles

App Model Dana 30 Standard

Cover Bolt Quantity 10, 10

Differential Carrier Break 3.73 Ratio and Higher, 3.73 Ratio and Higher

Differential Case Design Type Dana 30 Standard, Dana 30 Standard

Gear Ratio 4.10, 4.1

Pinion Gear Tooth Quantity 10, 10

Pinion Shaft Diameter 1.376 (Inch), 1.376 (Inch)

Pinion Spline Count 26, 26

Position Front

Prop 65 Long Label WARNING: Reproductive Harm - www.p65warnings.ca.gov

Prop 65 Short Label WARNING: Cancer - www.p65warnings.ca.gov

Prop 65 Y N N

Ratio 4.10

Ring Gear Bolt Quantity 10, 10

Ring Gear Material 8620 Steel, 8620 Steel

Ring Gear Outside Diameter 7.125 (Inch), 7.125 (Inch)

Ring Gear Rotation Standard, Standard

Ring Gear Tooth Quantity 41, 41

Taxonomy A LD Differential, LD Differential, LD Differential, LD Differential

Taxonomy B Ring and Pinion, Ring and Pinion, Ring and Pinion

Taxonomy C Front, Front, Front

Taxonomy D 4.10, 4.10, 4.10

Where to buy

1980 – 1988 American Motors Eagle
Application notes:
- For Dana 30
- 4.10 Ratio
- Requires a 3.73 and Numerically Higher Ratio Carrier
1966 – 1971 Ford Bronco
Application notes:
- For Dana 30
- 4.10 Ratio
- Requires a 3.73 and Numerically Higher Ratio Carrier
1967 – 1971 International Scout
Application notes:
- For Dana 30
- 4.10 Ratio
- Requires a 3.73 and Numerically Higher Ratio Carrier
1971 – 1977 International Scout II
Application notes:
- For Dana 30
- 4.10 Ratio
- Requires a 3.73 and Numerically Higher Ratio Carrier
1976 – 1986 Jeep CJ7
Application notes:
- For Dana 30
- 4.10 Ratio
- Requires a 3.73 and Numerically Higher Ratio Carrier
1993 – 1996 Jeep Grand Cherokee
Application notes:
- For Dana 30
- 4.10 Ratio
- Requires Conversion Bearing Kit
- Requires a 3.73 and Numerically Higher Ratio Carrier
1981 – 1985 Jeep Scrambler
Application notes:
- For Dana 30
- 4.10 Ratio
- Requires a 3.73 and Numerically Higher Ratio Carrier

Installation Instructions

⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov