Differential Ring and Pinion (10 Bolt)
D44409 Application Notes
Warranty
1 Year or 50,000 Miles
D44409 Specifications
App Model
Dana 44 Standard
Cover Bolt Quantity
10
Differential Carrier Break
3.92 Ratio and Higher
Differential Case Design Type
Dana 44 Standard
Gear Ratio
4.10
Pinion Gear Tooth Quantity
10
Pinion Shaft Diameter
1.376 (Inch)
Pinion Spline Count
26
Ring Gear Bolt Quantity
10
Ring Gear Material
8620 Steel
Ring Gear Outside Diameter
8.5 (Inch)
Ring Gear Rotation
Standard
Ring Gear Tooth Quantity
41
Taxonomy A
LD Differential
Taxonomy B
Ring and Pinion
Taxonomy C
Front, Rear
Taxonomy D
4.10
Vehicle Applications
-
1967 Chevrolet C10 Panel
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1967 – 1968 Chevrolet C10 Pickup
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1984 – 1985 Chevrolet Camaro
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1992 – 1994 Chevrolet Camaro
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1980 – 1982 Chevrolet Corvette
Application notes:
- For Dana 44 ICA
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1960 – 1966 Chevrolet Suburban
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1988 – 1989 Chrysler Mercer
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1948 – 1952 Ford F-1
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1953 Ford F-100
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1975 – 1979 Ford F-100
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1967 – 1968 GMC C15/C1500 Pickup
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1968 GMC C15/C1500 Suburban
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1960 – 1966 GMC Suburban
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1974 International 100
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1966 International 1100A
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1967 International 1100B
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1968 International 1100C
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1969 – 1970 International 1100D
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1971 – 1973 International 1110
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1966 International 1200A
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1967 International 1200B
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1968 International 1200C
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1969 – 1970 International 1200D
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1971 – 1973 International 1210
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1974 – 1975 International 150
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1974 – 1975 International 200
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1968 – 1971 International Scout
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1971 – 1980 International Scout II
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1993 – 1997 Isuzu Rodeo
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1955 – 1967 Jaguar 2.4
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1967 – 1969 Jaguar 240
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1957 – 1968 Jaguar 3.4
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1960 – 1969 Jaguar 3.8
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1967 – 1970 Jaguar 340
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1967 – 1968 Jaguar 420
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1959 – 1961 Jaguar Mark IX
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1962 – 1966 Jaguar Mark X
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1968 – 1971 Jaguar XJ
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1972 – 1997 Jaguar XJ6
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1976 – 1996 Jaguar XJS
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1997 – 2006 Jaguar XK8
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1960 – 1983 Jeep CJ5
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1966 – 1968 Jeep CJ5A
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1966 – 1975 Jeep CJ6
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1966 – 1968 Jeep CJ6A
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1986 Jeep CJ7
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1974 – 1993 Jeep Cherokee
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1986 – 1992 Jeep Comanche
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1966 – 1973 Jeep Commando
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1984 – 1991 Jeep Grand Wagoneer
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1993 Jeep Grand Wagoneer
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1967 – 1973 Jeep J-100
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1974 – 1988 Jeep J10
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1974 – 1977 Jeep J20
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1979 – 1988 Jeep J20
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1966 – 1971 Jeep Jeepster
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1981 – 1985 Jeep Scrambler
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1997 – 2006 Jeep TJ
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1987 – 1995 Jeep Wrangler
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1997 – 2006 Jeep Wrangler
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
-
1963 – 1967 Shelby Cobra
Application notes:
- For Dana 44
- 4.09 Ratio
- Requires a 3.92 and Numerically Higher Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
