Differential Ring and Pinion (10 Bolt)

1064
1063
131345
131346
131347

D44538 Application Notes

Warranty

1 Year or 50,000 Miles

D44538 Specifications

App Model Dana 44 Standard
Cover Bolt Quantity 10
Differential Carrier Break 3.92 Ratio and Higher
Differential Case Design Type Dana 44 Standard
Gear Ratio 5.38
Pinion Gear Tooth Quantity 8
Pinion Shaft Diameter 1.376 (Inch)
Pinion Spline Count 26
Ring Gear Bolt Quantity 10
Ring Gear Material 8620 Steel
Ring Gear Outside Diameter 8.5 (Inch)
Ring Gear Rotation Standard
Ring Gear Tooth Quantity 43
Taxonomy A LD Differential, LD Differential, LD Differential
Taxonomy B Ring and Pinion, Ring and Pinion, Ring and Pinion
Taxonomy C Front, Rear, Front, Rear, Front, Rear
Taxonomy D 5.38, 5.38, 5.38
Where to buy

Vehicle Applications

  • 1992 – 1995 Buick Monterey

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1967 Chevrolet C10 Panel

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1967 – 1968 Chevrolet C10 Pickup

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1984 – 1985 Chevrolet Camaro

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1992 – 1994 Chevrolet Camaro

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1980 – 1982 Chevrolet Corvette

    Application notes:

    • For Dana 44 ICA
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1960 – 1966 Chevrolet Suburban

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1948 – 1952 Ford F-1

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1953 Ford F-100

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1975 – 1979 Ford F-100

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1967 – 1968 GMC C15/C1500 Pickup

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1968 GMC C15/C1500 Suburban

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1960 – 1966 GMC Suburban

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1974 International 100

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1966 International 1100A

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1967 International 1100B

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1968 International 1100C

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1969 – 1970 International 1100D

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1971 – 1973 International 1110

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1966 International 1200A

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1967 International 1200B

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1968 International 1200C

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1969 – 1970 International 1200D

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1971 – 1973 International 1210

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1974 – 1975 International 150

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1974 – 1975 International 200

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1968 – 1971 International Scout

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1971 – 1980 International Scout II

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1993 – 1997 Isuzu Rodeo

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1955 – 1967 Jaguar 2.4

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1967 – 1969 Jaguar 240

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1957 – 1968 Jaguar 3.4

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1960 – 1969 Jaguar 3.8

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1967 – 1970 Jaguar 340

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1967 – 1968 Jaguar 420

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1959 – 1961 Jaguar Mark IX

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1962 – 1966 Jaguar Mark X

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1968 – 1971 Jaguar XJ

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1972 – 1997 Jaguar XJ6

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1976 – 1996 Jaguar XJS

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1997 – 2006 Jaguar XK8

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1960 – 1983 Jeep CJ5

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1966 – 1968 Jeep CJ5A

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1966 – 1975 Jeep CJ6

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1966 – 1968 Jeep CJ6A

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1986 Jeep CJ7

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1974 – 1993 Jeep Cherokee

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1986 – 1992 Jeep Comanche

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1966 – 1973 Jeep Commando

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1984 – 1991 Jeep Grand Wagoneer

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1993 Jeep Grand Wagoneer

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1967 – 1973 Jeep J-100

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1974 – 1988 Jeep J10

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1974 – 1977 Jeep J20

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1979 – 1988 Jeep J20

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1966 – 1971 Jeep Jeepster

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1981 – 1985 Jeep Scrambler

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1997 – 2006 Jeep TJ

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1987 – 1995 Jeep Wrangler

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1997 – 2006 Jeep Wrangler

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
  • 1963 – 1967 Shelby Cobra

    Application notes:

    • For Dana 44
    • 5.38 Ratio
    • Requires a 3.92 and Numerically Higher Ratio Carrier
    • Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov